SAT Fire System Eagle Quantum Premier (EQP) , Sept. 2015

Sekedar sharing…

Beberapa hari yang lalu juare97 ikut SAT (Site Acceptance Test) dari project upgrade Sistem Fire and Gas di salah satu plant kami.

Sistem Fire and Gas ini menggunakan Eagle Quantum Premier (EQP) menggantikan sistem lama, Eagle Quantum (EQ), yang sudah obsolete.
Project ini hanya mengganti Fire&Gas Controllernya saja, sedangkan detectornya masih pakai existing.

Sistem ini didesain redundant controller dan networknya LON (ring).
Sistem ini buatan Detronics dimana agennya di Indonesia adalah Wifgas.

Berikut penampakannya.

Terlihat berantakan kabelnya karena mmng temporary saja. 🙂

Untuk pengetesan device cukup satu saja masing2 type. Nanti tinggal diganti2 addressnya saja.

Ada IDC (Input seperti Break Glass, Smoke Detector), SAM (HORN), UV/IR, Gas Detector.

SAT ini mengecek barang yang datang apakah sudah sesuai dengan list.
Lalu lanjut dengan menyalakan device (power ON) dan tes fungsi (function test) baik tes Input Output maupun tes logicnya.
Sehingga diharapkan saat Commmissioning bisa berjalan dengan lancar.

Berhubung ada meeting di JKT, juare97 hanya bisa ikut bbrp hari saja.
Jadi tidak melihat instalasi dan commissioningnya.

Semoga berjalan dengan lancar. 🙂

—-

Tambahan info:

Contoh Jaringan LON Redundant EQP.

Redundant EQP, LON dengan field device

Info lainnya:

http://www.det-tronics.com/ProductCatalog/CertifiedSystems/Pages/EQ3000EQPController.aspx

sumber: SPECIFICATION DATA Eagle QuantumPremier® Fire and Gas Detection / Releasing System (90-1150-3.2_eqp_system.pdf)
SYSTEM DESCRIPTION

The Eagle Quantum Premier system is a third generation hazard protection system that is designed for fire and gas detection, control of notification appliance circuits, and the releasing of various suppression agents. The system utilizes modularized field devices on a digital communication loop. All detection,re-action, and notification activities are coordinated
through a centralized Controller.

The system has the flexibility to utilize any combination of Eagle Quantum Premier field devices. It can be configured as a total gas detection system, a total fire detection system, or a combination of both fire and gas detection. All devices and operating parameters are configured through the Controller.

Third party devices can be integrated into the system either through dry contact closure inputs (using IDCs/DCIOs) or through 4 to 20 mA inputs (using DCUs/Analog Input Modules).

Through its centralized control unit, the Eagle Quantum Premier system provides an open architecture in which systems can be tied together to share information. PLC, DCS and human/machine interface (HMI) systems can communicate directly with the Eagle Quantum Premier system through supported communication protocols. The controller supports up to five serial ports, utilizing Modbus RTU master/slave protocol and Safety System Software (S3) for configuring the EQP system. An optional redundant media ControlNet board is also available.

The Eagle Quantum Premier Controller displays current information about the system. Twelve LEDs are provided to indicate when an alarm or fault condition exists. A four line 20-character vacuum fluorescent display (VFD), controlled by front panel membrane buttons, can display a variety of status and diagnostic information. Alarm and trouble conditions are easily identified, along with the associated device tagname.

The Eagle Quantum Premier system provides operational flexibility through custom designed user logic programs in the controller. Over 50 different types of logic functions are available to allow the system to be optimized for fire and gas applications.

CONTROLLER REDUNDANCY

Two EQP controllers can be configured as a redundant pair, thereby increasing the availability of the system. The controllers work in “Master” and “Hot Standby” mode. Under normal operating conditions, the Standby controller receives the same inputs and update information as the Master, but has no control over the outputs and does not execute user logic. In the event of a switchover, a bumpless transfer occurs.

Controller Redundancy offers the following benefits:
• Automatic configuration of the standby controller
• Bumpless transfer
• Forced and automatic switchover
• No downtime on controller replacement
• Automatic synchronization between controllers
• Increased system availability.

EAGLE QUANTUM PREMIER CONTROLLER

The microprocessorbased Controller continuously monitors the field devices on the Local
Operating Network / Signaling Line Circuit (LON/SLC) and performs the logic functions needed to generate the appropriate output(s). The Controller performs both static and user programmable logic operations. Static logic controls the faceplate displays and relay outputs (alarm, trouble and supervisory) per ANSI/NFPA 72. Static logic also activates built-in annunciation circuits, consisting of both visible and audible alarms.

Programmable logic allows the Controller to be customized to perform a variety of complex logic operations. Using Det-Tronics Safety System Software (S3), the Controller can be programmed to implement any cross-zone monitoring, voting, or timed operations that might be needed in a system.

The Controller also has provisions for communication with external devices and software. An optional ControlNet™ board is available for monitoring Eagle Quantum Premier’s system status
• Simplex / redundancy operation
• Approved annunciation and releasing device per NFPA 72
• Meets FM/CSA guidelines in an approved gas system
• Programmable logic
• Up to five available serial ports
• Transformer isolation of network ports
• Utilizes MODBUS and Allen Bradley ControlNet protocols
• Eight programmable relay outputs
• Eight digital inputs
• Four-line, 20 character alphanumeric display
• LED status indicators
• Fault tolerant communication loop
• Extensive built-in diagnostics
• Supports up to 246 field devices
• FM/CSA/CENELEC/CE